Shown in the figure below is a meter-bridge set up with null deflection in the galvanometer. The value of the unknown resistor $R$ is ............. $\Omega$.

In the experimental setup of a meter bridge shown in the figure,the null point is obtained at a distance of $40\,cm$ from $A$. If a $10\,\Omega$ resistor is connected in series with $R_1$,the null point shifts by $10\,cm$. The resistance that should be connected in parallel with $(R_1 + 10)\,\Omega$ such that the null point shifts back to its initial position is .............. $\Omega$.

In a metre-bridge,when a resistance in the left gap is $2 \ \Omega$ and an unknown resistance is in the right gap,the balance length is found to be $40 \ cm$. On shunting the unknown resistance with $2 \ \Omega$,the balance length changes by: (in $cm$)

In a meter bridge or Wheatstone bridge for the measurement of resistance,the known and the unknown resistances are interchanged. The error so removed is

In a meter bridge,the resistances $R$ and $S$ are such that the null point is found at a distance of $40 \text{ cm}$ from one end. If a resistance of $10 \Omega$ is connected in parallel with shunt $S$,then the null point occurs at $90 \text{ cm}$ from the same end. The values of the two resistances $R$ and $S$ respectively are:

On interchanging the resistances,the balance point of a meter bridge shifts to the left by $10 \, cm$. The resistance of their series combination is $1 \, k\Omega$. How much was the resistance on the left slot before interchanging the resistances? ................... $\Omega$